Fast50s Grom Hooligan Handle Bars - MSX125 / ZB50 (All Years)

MXS125 / Grom Hooligan Chromoly Handle Bars by Fast50s (also fit the Honda ZB50)

Tig welded 4130 Chromoly .095 wall are stronger than needed and look awesome with the gloss black powder coat finish.
YES we know we need to update this quick pic we took of the Hooligan bars..(This pic obviously DOES NOT do these awesome bars justice)
Our bars are the height of OEM but with a more straight & more aggressive sweep forward. Approx 4 degrees straighter than OEM, which allows for a more comfortable less cramped ride. These bars are 1" wider than OEM and easily 5-6 times stronger than the mild steel OEM bars.
We do not drill the bars for the OEM Throttle and blinker assembly locating pins (This is so you can rotate those to fit your needs)
If you'd like Fast50s can drill these for you to similar specs of your OEM bars but that is NOT recommended so you can set them custom to fit you.
(Please Note) OEM bar ends will not just bolt up since our bars are a thick wall tubing and the I.D. is smaller (O.D. is still 7/8" like stock) You can still put bar end mirrors or aftermarket bar end on these bars.
BTW, the OEM bar ends could be used if a threaded bung/insert is pressed in or tack welded in the bar i.d.) We that's know more info than you need but we try to cover all the bases!! :
Note: These bars are higher approx. 1-1.5" taller than the OEM Honda ZB50 bars and about 4 inches wider and that killer aggressive sweep compared to the in your lap ZB50 OEM bars.

Fits:
     -Grom / MSX125 (All Years)
     -ZB50 (1988)

If you have any questions please call one of our knowledgeable and friendly techs at 833-327-8507