Takegawa Heavy Duty 5-Disc Reinforced Clutch Kit XR100 / CRF100

Takegawa Heavy Duty 5 Disc Reinforced Clutch Kit XR100 / CRF100

When you add this 5-Disk kit to your XR100 / CRF100 it prevents slipping compared to the OEM 4 Disk clutch.
The OEM Honda clutch is OK for the stock bore but if you're pushing it with anything larger than standard bore you need this kit to the get the most power out of your "100"
(Also able to install it along with OEM engine and OEM clutch cover for that "Sleeper" look)

Specifications:
     -Raises damper volume by changing the number of clutch dampers from 4 to 6.
     -This kit changes your oil pump reduction speed from 2.187 to 1.833 & increase the discharge amount of oil per one engine rotation. (More good news)
     -Primary ratio goes from 4.437 to 3.833 which raises the high gear by 16%, which widens your choice of drive sprockets. (Our bikes are 14/42 Gearing)
     -This kit also uses 10% more reinforced type clutch spring compared to others.
     --Cast iron is used for the clutch center and the friction disc contact surface of the pressure plate to greatly improve durability.
     -You still use the OEM lifter plate, guide pin, bearing and flange bolt doing your installation.

Primary ratio reduction they say you MUST change gearing, but it's NOT as big a deal as they make it seem but you can now pull taller gearing & to pull away from the competition!!

We carry lots of Takegawa parts & accessories, if you do not see it on our website we just might not have it loaded yet or we can special order any parts for you if need be!

If you have any questions please call one of our knowledgeable and friendly techs at 833-327-8507